Panasonic GA-ML Series Manual page 240

Hide thumbs Also See for GA-ML Series:
Table of Contents

Advertisement

Parameter
Message Code
IP Precedence
ToS
DSCP
TCP Flag
Time-Range
Action
Click Next to proceed to the next step in the wizard.
Click Back to return to the previous step in the wizard.
If you do not choose the Specify ICMP Message type,
enter the numerical value of a message code you use.
The range is from 0 to 255. If you choose the ICMP
Message Type, the numerical value of the message
type is automatically entered. This parameter is available
when you select ICMP as the protocol type.
Choose the value of IP precedence you use. The options
available are routine (0), priority (1), immediate (2),
flash (3), flash-override (4), critical (5), Internet (6)
and network (7).
• Value - You can enter the value of the IP
precedence, manually. The range is from 0 to 7.
• Mask - Enter the value of an IP precedence mask.
The range is from 0x0 to 0x7.
Choose the value of Type-of-Service (ToS). The options
available are normal (0), min-monetary-cost (1), max-
reliability (2), max-throughput (4) and min-delay (8).
• Value - You can enter the ToS value, manually. The
range is from 0 to 15.
• Mask - Enter the ToS mask value. The range is from
0x0 to 0xF.
Choose the DSCP value. The options available are
default (0), af11 (10), af12 (12), af13 (14), af21 (18),
af22 (20), af23 (22), af31 (26), af32 (28), af33 (30),
af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3
(24), cs4 (32), cs5 (40), cs6 (48), cs7 (56) and ef (46).
• Value - You can manually enter the DSCP value. The
range is from 0 to 63.
• Mask - Enter the value of DSCP mask. The range is
from 0x0 to 0x3F.
Choose the TCP flag to evaluate for this ACL. The
options available are ack, fin, psh, rst, syn and urg.
This parameter is available only if you choose TCP from
the Protocol Type.
Enter the name of the time-range profile used in this
ACL rule. The number of characters for the name can be
up to 32.
Choose an action to execute with this rule. The options
available are Permit and Reject.
8 ACL (Access Control List)
8.1.2 IPv4
Overview
238

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents