Arp Table - Panasonic GA-ML Series Manual

6.1.3

ARP Table

Use the following window to display and clear the ARP entries in a table
Choose L3 Features > ARP > ARP Table to display the following window.
In the section of Searching for ARP, you can configure the following
parameters.
Parameter
Interface VLAN
IP Address
Mask
Hardware Address
Type
Click Find to search and display the entries based on the search condition
specified.
Click Clear All to clear all the entries from a table.
Click Clear to delete entries specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 6-3 ARP Table
Choose and enter a VLAN ID of an interface. The range
is from 1 to 4,094.
Choose and enter an IP address to be displayed.
Choose and enter a subnet-mask of an IP address.
Choose and enter a MAC address to be displayed.
Choose the Type option. The options available are All
and Dynamic.
6 L3 Features
6.1.3 ARP Table
Overview
181