Protocol Vlan Profile Interface - Panasonic GA-ML Series Manual

5.2.2.2

Protocol VLAN Profile Interface

Use the following window to implement the settings on an interface of a
protocol VLAN profile and display its settings.
Choose L2 Features > VLAN > 802.1v Protocol VLAN > Protocol VLAN
Profile Interface to display the following window.
In the section of Adding a New Protocol VLAN Interface, you can
configure the following parameters.
Parameter
Port
Profile ID
VID
Priority
Click Apply to add new entries based on the information specified.
Click Delete to delete the entry.
Figure 5-11 Protocol VLAN Profile Interface
Choose the port-number of a switch you configure.
Choose the profile ID of 802.1v protocol VLAN.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Choose the priority value you use. Specify the value
within the range from 0 to 7. Specify this parameter to
rewrite (or transcribe) 802.1p default-priority, which is
configured on the switch beforehand. This priority
determines the CoS (Class of Service) queue, which is
the destination of transferring packets. After specifying
this field, if a switch receives packets, which correspond
to this priority, the packets are transferred to the CoS
queue configured in advance.
5.2.2.2 Protocol VLAN Profile Interface
Overview
5 L2 Features
93