Firmware Upgrade From Tftp - Panasonic GA-ML Series Manual

14.2.1.2 Firmware Upgrade from TFTP

Use the following window to upgrade firmware in a switch from a TFTP
server.
Choose Tool > Firmware Upgrade & Backup > Firmware Upgrade
from TFTP (Servers) to display the following window.
Figure 14-3 Firmware Upgrade from TFTP (Servers)
You can configure the following parameters.
Parameter
TFTP Server IP
Source File
Destination File
Click Upgrade to start upgrading.
14.2.1.2 Firmware Upgrade from TFTP
Enter an IP address of a TFTP server.
• IPv4 - Choose and enter an IPv4 address of a TFTP
server.
• IPv6 - Choose and enter an IPv6 address of a TFTP
server.
• IPv6 - Choose and enter an IPv6 address of a TFTP
server.
Enter the source file-name and path of a firmware file in
a TFTP server. The number of characters for this field
can be up to 64.
Enter the destination path and location in the switch
where new firmware is stored. The number of
characters for this field can be up to 64.
Overview
14 Tool Bar
407