Advanced Settings; Dscp Mutation Map - Panasonic GA-ML Series Manual

7.2

Advanced Settings

7.2.1
Use the following window to implement the settings on DSCP
(Differentiated Services Code Point) mutation map and display its settings.
Choose QoS > Advanced Settings > DSCP Mutation Map to display the
following window.
In the section of a DSCP Mutation Map, you can configure the following
parameters.
Mutation Name
Input DSCP List
Output DSCP List
Click Apply to add a new entry.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.

DSCP Mutation Map

Figure 7-7 DSCP Mutation Map
Parameter
Enter the name of the DSCP mutation map. The number
of characters for the name can be up to 32.
Enter the value of input DSCP list. The range is from 0 to
63.
Enter the value of output DSCP. The range is from 0 to
63.
7.2 Advanced Settings 7.2.1 DSCP Mutation Map
Overview
7 QoS (Quality of Service)
207