Panasonic GA-ML Series Manual page 225

Parameter
Conform Traffic
Action
Exceed Action
Choose the conform-traffic action to be taken. Perform
the action on green colored packets. The options
available are as follows.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets. Enter the DSCP value in the entry field
displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the IEEE 802.1p value in the entry
field displayed.
• Transmission - This option allows you to transmit
packets without changing them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the values of a new DSCP
and IEEE 802.1p to packets. Enter the values in the
entry field displayed.
Choose the exceed-action to be taken. This action is
taken on the yellow colored packets, which exceed the
bandwidth limitation. The options available are as
follows.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets. Enter the DSCP value in the entry field
displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the IEEE 802.1p value in the entry
field displayed.
• Transmission - This option allows you to transmit
packets without changing them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the values of a new DSCP
and IEEE 802.1p to packets. Enter the values in the
entry field displayed.
7 QoS (Quality of Service)
7.2.8 Policy Map
Overview
223