Panasonic GA-ML Series Manual page 194

Click Apply to add a new entry.
Click Edit to edit the configuration of the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Choose the DHCPv6 Client tab to display the following window.
Figure 6-13 IPv6 Interface (Show Detail, DHCPv6 Client)
Click Restart to restart a function of DHCPv6 Client.
In the section of DHCPv6 Client Settings, you can configure the
following parameter.
Parameter
Client State
In the section of DHCPv6 Client PD Settings, you can configure the
following parameters.
Parameter
Client PD State
General Prefix Name
IPv6 DHCP
Client PD Hint
This parameter enables or disables DHCPv6 client
services. If you choose Rapid Commit, exchanging two
messages for address delegation continues. The high-
speed commit option is included in solicit messages, and
two-message handshake is required.
This parameter enables or disables the DHCPv6 client
process that requires PD (Prefix Delegation) through the
interface specified. If you choose the Rapid Commit
option, exchanging two messages for the prefix
delegation continues. The rapid commit option is
included in solicit message, and two-messages
handshake is required.
Enter the name of IPv6 general-prefix. The number of
characters for the name can be up to 12.
Enter an IPv6 prefix to transmit it as a hint with
messages.
6 L3 Features
6.4.2 IPv6 Interface
Overview
Overview
192