Panasonic GA-ML Series Manual page 134

Parameter
Tunneled Protocol
Protocol MAC
MAC Address
Click Apply to reflect the change.
Choose the L2 Protocol Tunnel Port Settings tab to display the
following window.
Figure 5-43 L2 Protocol Tunnel（L2 Protocol Tunnel Port Settings）
In the section of L2 Protocol Tunnel Port Settings, you can configure
the following parameters.
Parameter
From Port/ To Port
Action
Type
Tunneled Protocol
Choose a tunneled protocol. The options available are
as follows.
• GVRP - GVRP packets are tunneled to the address,
which is configured already.
• STP - STP packets are tunneled to the address, which
is configured already.
• MAC - Protocol packets with the specific destination
address are tunneled to the address configured.
• All - All packets are tunneled to the address, which is
configured already.
After choosing the MAC option as a Tunneled
Protocol, choose the destination address, which is
tunneled on the address configured. The options
available are 01-00-0C-CC-CC-CC and 01-00-0C-CC-CC-
CD.
Enter a MAC address as the tunneling destination for
the protocol specified. For this MAC address, you
cannot specify the address, which is reserved or used by
other protocols.
Choose the port you use.
Click Add to add a new entry based on the information
entered. Click Delete to delete an entry based on the
information entered.
Choose the type option. The options available are
,
None Shutdown and Drop
Choose the tunneled protocol option. The options
available are GVRP, STP, Protocol MAC and ALL.
5 L2 Features
5.6 L2 Protocol Tunnel
Overview
Overview
.
132