L2 Multicast Control; Igmp Snooping; Igmp Snooping Settings - Panasonic GA-ML Series Manual

Hide thumbs Also See for GA-ML Series:

Table of Contents

5.7 L2 Multicast Control

Use the following window to implement the settings on IGMP (Internet

Group Management Protocol) Snooping and display its settings.

Choose L2 Features > L2 Multicast Control > IGMP Snooping > IGMP

Snooping Settings to display the following window.

In the section of Global Settings, you can configure the following

Global State

Click Apply to reflect the change.

In the section of VLAN State Settings, you can configure the following

Click Apply to add new entries based on the information specified.

In the section of a table of IGMP Snooping, you can configure the

following parameter.

5.7 L2 Multicast Control 5.7.1 IGMP Snooping 5.7.1.1 IGMP Snooping Settings

Figure 5-44 IGMP Snooping Settings

This parameter enables or disables to set IGMP

Snooping to global.

Enter the VLAN ID you use. The range is from 1 to

5 L2 Features

Show Quick Links

Table of Contents