Panasonic GA-ML Series Manual page 157

Parameter
ACL Name
VID
Click Apply to reflect the change.
In the section of a table of MLD Snooping Filter, you can configure the
following parameter.
Parameter
From Port/ To Port
Click Find to search and display the entries in a table based on the search
condition specified.
Click See All to search and display all the entries available.
Click Show Detail to display details on the entry.
If two or more pages exist, enter the page numbers. Click Go to move to a
specific page.
Click Show Detail to display the following window.
Figure 5-57 MLD Snooping Filter Settings (Show Detail.)
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Click Back to return to the previous window.
5.7.2.3 MLD Snooping Filter Settings
Enter the name of the standard IP access-list. Use this
parameter to allow users to participate in the group (*,
G). To authorize a group (*,G), specify "any" in the
source-address field of the access-list entry and "G" in
the destination-address field. The number of characters
for the name can be up to 32. Or, click Please Click to
retrieve the existing access list, which is configured by a
switch for using this configuration, and then choose the
list.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Choose the port you use.
5 L2 Features
Overview
Overview
155