Panasonic GA-ML Series Manual page 248

If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Click Edit to display the following window.
In the section of ACL Access List, you can configure the following
parameters.
Parameter
Starting Sequence
Number
Step
Counter State
Annotation
Click Apply to check the content changed.
Figure 8-13 ACL Access List (Edit)
Enter the starting sequence number.
Enter the step of sequence numbers. The range of step
is from 1 to 32. This specifies the number of steps for
the sequence number. The default value is 10. For
example, if the increment (step) value is 5 and the
starting sequence number is 20, the following sequence
numbers become 25, 30, 35 and 40.
This parameter enables or disables the counter state
option.
Enter (or insert) an annotation for the option to
associate with this ACL.
8 ACL (Access Control List)
8.2 ACL Access List
Overview
246