Telnet/Web - Panasonic GA-ML Series Manual

4.6

Telnet/Web

Use the following window to implement the settings on Telnet and Web
of the switch and display its settings.
Choose Management > Telnet/Web to display the following window.
In the section of the Telnet Settings, you can configure the following
parameters.
Telnet State
Port
Click Apply to reflect the change.
In the section of the Web Settings, you can configure the following
parameters.
Web State
Port
Click Apply to reflect the change.
Parameter
This parameter enables or disables a function of a
Telnet server.
Enter the TCP port-number to use for Telnet
management of a device. (TCP stands for Transmission
Control Protocol.) The TCP port, which is typically used
for Telnet protocol is 23.
Parameter
This parameter enables or disables the configuration via
(or on the) Web.
Enter the TCP port-number to use for Telnet
management of a device. The TCP port typically used
for Telnet protocol is 80.
Figure 4-16 Telnet/Web
Overview
Overview
4 Management
4.6 Telnet/Web
69