Forced Authorized Mac Settings - Panasonic GA-ML Series Manual

9.2.2 802.1X Forced Authorized MAC Settings
Use the following window to implement the settings on IEEE 802.1X
forced authorized MAC and display its settings.
Choose Security > 802.1X > 802.1X Forced Authorized MAC Settings to
display the following window.
In the section of Forced Authorized MAC Settings, you can configure
the following parameters.
From Port/ To Port
MAC Address
Mask Length
Authentication Status Choose the authentication status. The options available
Click Apply to add a new entry.
Click Find to search and display the entries based on the search condition
specified.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 9-5 802.1X Forced Authorized MAC Settings
Parameter
Choose the port you use.
Enter a MAC address of supplicant.
Enter the MAC mask bit-length. The range is from 0 to
48.
are as follows.
• Authorized - Choose this option to force the
• Unauthorized - Choose this to force the
9.2.2 802.1X Forced Authorized MAC Settings
Overview
authorized status.
unauthorized status.
9 Security
285