Dhcp Snooping Port Settings - Panasonic GA-ML Series Manual

9.7.1.1.2

DHCP Snooping Port Settings

Use the following window to implement the settings on the DHCP
Snooping and display its settings.
Choose Security > SAVI > IPv4 > DHCPv4 Snooping > DHCP Snooping
Port Settings to display the following window.
In the section of DHCP Snooping Port Settings, you can configure the
following parameters.
Parameter
From Port/ To Port
Entry Limit
Bandwidth Limit
(Rate Limit)
Trusted
Click Apply to reflect the change.
Figure 9-42 DHCP Snooping Port Settings
Choose the port you use.
Enter the entry limit value. The range is from 0 to 508.
If you set No Limit to on, the function becomes
disabled.
Enter the value of bandwidth limitation. The range is
from 1 to 300. If you set No Limit to on, the function
becomes disabled.
Choose the trusted option. The options available are No
and Yes. The port connected to a DHCP server or other
switches must be configured as a trusted interface. The
ports connected to a DHCP client must be configured as
an untrusted interface. DHCP Snooping operates as a
firewall between an untrusted interface and a DHCP
server.
9.7.1.1.2 DHCP Snooping Port Settings
Overview
9 Security
329