Panasonic GA-ML Series Manual page 266

Figure 8-23 ACL Access List (Adding Rules, Extended MAC ACL)
In the section of Add ACL Rules, you can configure the following
parameters.
Parameter
Sequence Number
Action
Source
Destination
Specify Ethernet Type Choose the Ethernet type option. The options available
Enter the ACL rule number. The range is from 1 to
65,535. If not specified, this number is automatically
generated.
Choose an action to execute with this rule. The options
available are Permit and Reject.
Choose and enter the information on a source MAC
address. The options available are as follows.
• Optional - Evaluates the optional source traffic
according to this rule condition.
• Host - Enter a source-host MAC address.
• MAC - Enter the source MAC address and the
Wildcard value in the entry fields provided
Choose and enter the destination MAC address
information. The options available are as follows.
• Optional - Evaluates the optional destination traffic
according to this rule condition.
• Host - Enter a destination host MAC address.
• MAC - Enter a destination MAC address and the
Wildcard value in the entry field displayed.
are aarp, appletalk, decent-iv, etype-6000, etype-
8042, lat, lavc-sca, mop-console, mop-dump, vines-
echo, vines-ip, xns-idp and arp.
8 ACL (Access Control List)
8.2.5 Extended MAC ACL
Overview
264