Time Range - Panasonic GA-ML Series Manual

3.6

Time Range

Use the following window to implement the settings on a time range
profile and display its settings.
Choose System > Time Range to display the following window.
In the section of Time Range, you can configure the following
parameters.
Range Name
From Week -
To Week
From Starting Time
(HH:MM) to Ending
Time (HH:MM)
Click Apply to add a new entry based on the information specified.
Click Find to search the entry in a table based on the search condition
specified for displaying.
Click Show All to find and display all the entries available.
Click the Delete Periodic button to delete the periodic entry.
Click Delete to delete the entries.
Parameters
Enter the name of a time range profile. The number of
characters for the name can be up to 32.
Select the starting and ending days of the week that will
be used for this time profile. If you set the Daily option
to on, the time profile is used for all days. When the
option of a final week is set to ON, this time profile is
used from the beginning of a week to the end of it.
Choose the starting and ending time that will be used
for this time profile. The first (left-side) drop-down
menu allows you to choose the time. You can choose
the minute on the second (right-side) drop-down menu.
Figure 3-19 Time Range
Overview
3 System
3.6 Time Range
37