9.9
NetBIOS Filtering
Use the following window to implement the settings on the NetBIOS
filtering of the port specified and display its settings.
Choose Security > NetBIOS Filtering to display the following window.
In the section of NetBIOS Filtering, you can configure the following
parameters.
From Port/ To Port
NetBIOS Filtering
State
Extensive NetBIOS
Filtering State
Click Apply to reflect the change.
Figure 9-56 NetBIOS Filtering
Parameter
Choose the port you use.
This parameter enables or disables the NetBios filtering
state on the port specified. Use this to permit or deny
NetBIOS packets on the physical port.
This parameter enables or disables the state of the
extensive NetBIOS filtering on the port specified.
Use this to permit or deny the NetBIOS packets through
the 802.3 frame on the physical port.
9.9 NetBIOS Filtering
Overview
9 Security
348