Gvrp Advertise Vlan - Panasonic GA-ML Series Manual

5.2.3.3

GVRP Advertise VLAN

Use the following window to implement the settings on GVRP advertise
VLAN and display its settings.
Choose L2 Features > VLAN > GVRP > GVRP Advertise VLAN to display
the following window.
In the section of GVRP Advertise VLAN, you can configure the following
parameters.
Parameter
From Port/ To Port
Action
Advertise VID List
Click Apply to reflect the change.
Figure 5-14 GVRP Advertise VLAN
Choose the port you use.
Choose the advertise VLAN to use for a port mapping
action. The options available are All, Add, Delete and
Replace. If you choose All, all the advertise VLANs are
used.
Enter a VLAN ID to advertise it. You can enter its
consecutive VLAN IDs by delimiting with a comma. Or,
you can enter the range of VLAN IDs by delimiting with
a hyphen. The range is from 1 to 4,094.
5 L2 Features
5.2.3.3 GVRP Advertise VLAN
Overview
96