Acl Vlan Access Map - Panasonic GA-ML Series Manual

8.4

ACL VLAN Access Map

Use the following window to implement the settings on an ACL VLAN
access map and display its settings.
Choose ACL > ACL VLAN Access Map to display the following window.
In the section of ACL VLAN Access Map, you can configure the following
parameters.
Access Map Name
Sub Map Number
Action
Counter State
Click Apply to add a new entry.
Click Clear All Counters to clear all the counter information.
Click Clear Counters to clear the counter information about the specified
access map.
Click Find to search and display the entries based on the search condition
specified.
Click the Binding button to configure the binding for the specified entry.
Click Delete to delete the entry specified.
Figure 8-28 ACL VLAN Access Map
Parameter
Enter the name of an access-map. The number of
characters for the name can be up to 32.
Enter the sub map number. The range is from 1 to
65,535.
Choose the action you perform. The options available
are Forward, Drop and Redirect. If you choose the
Redirect option, choose the redirect-destination
interface from the drop-down list.
This parameter enables or disables the counter state.
8 ACL (Access Control List)
8.4 ACL VLAN Access Map
Overview
274