Panasonic GA-ML Series Manual page 117

In the section of Private VLAN Association, you can configure the
following parameters.
Parameter
VID List
Action
Secondary VID List
Click Apply to reflect the change.
In the section of the Private VLAN Host Association, you can configure
the following parameters.
Parameter
From Port/ To Port
Primary VID
Secondary VID
Click Apply to reflect the change.
Enter the private VLAN ID you use. You can enter its
consecutive VLAN IDs, by delimiting with a comma, or
enter the range of VLAN IDs by delimiting with a
hyphen. The range is from 1 to 4,094.
Choose an action to execute on the private VLAN.
The options available are Add, Delete and Disable.
Enter a secondary private VLAN ID to use it. You can
enter its consecutive VLAN IDs by delimiting with a
comma or enter the range of VLAN IDs by delimiting
with a hyphen. The range is from 1 to 4,094.
Choose the port you use.
Enter the primary VLAN ID you use. The range is from 1
to 4,094.
Enter the secondary VLAN ID you use. The range is from
1 to 4,094. If the option of Remove Association is set
to on, this settings does not become enabled.
5 L2 Features
5.2.9 Private VLAN
Overview
Overview
115