Authentication; Authentication Dynamic Vlan Settings - Panasonic GA-ML Series Manual

9.4

Authentication

9.4.1
Use the following window to implement the dynamic VLAN settings,
which is used for an authentication, and display its settings.
Choose Security > Authentication > Authentication Dynamic VLAN
Settings to display the following window.
In the section of Authentication Dynamic VLAN Settings, you can
configure the following parameters.
Accept RADIUS
Attribute
From Port/ To Port
Guest VLAN
Guest VLAN ID
Default VLAN
Default VLAN ID
Click Apply to check the content changed.
9.4 Authentication 9.4.1 Authentication Dynamic VLAN Settings

Authentication Dynamic VLAN Settings

Figure 9-28 Authentication Dynamic VLAN Settings
Parameter
This parameter enables or disables the acceptance of
the RADIUS attribute.
Choose the port you use.
This parameter enables or disables a Guest VLAN. If this
is enabled, hosts are allowed to access to the guest
VLAN without any authentication.
Enter the guest VLAN ID whose range is from 1 to
4,094.
This parameter enables or disables the default VLAN.
The hosts, which are accurately authenticated, are
allocated to the default VLAN if a dynamic VLAN
function is disabled or a host target VLAN is disabled (or
invalid).
Enter a default VLAN ID. The range is from 1 to 4,094.
Overview
9 Security
314