Ipv4 Default Route - Panasonic GA-ML Series Manual

6 L3 Features

6.5 IPv4 Default Route

6.5 IPv4 Default Route
Use the following window to implement the settings on an IPv4 default
route and display its settings.
Choose L3 Features > IPv4 Default Route to display the following
window.
Figure 6-14 IPv4 Default Route
In these section of IPv4 Default Route, you can configure the following
parameter.
Parameter Overview
Gateway Enter a gateway address of this route.
Click Apply to add a new entry.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
194