Panasonic GA-ML Series Manual page 27

Parameter
Identification Name
Write Delay
Click Apply to reflect the change.
In the section of the Console Log settings, you can configure the
following parameters.
Parameter
Console-log State
Severity
Identification Name
Click Apply to reflect the change.
In the section of the SMTP Log settings, you can configure the following
parameters.
Parameter
SMTP Log State
Severity
3.4 System Log 3.4.1 System Log Settings
Enter the identification name you use. The number of
characters can be used up to 15. Specify the name of a
discriminator profile. Based on the filtering standard
stipulated on this profile, buffer-log messages will be
filtered.
Enter the delay value of a log. The range is from 0 to
65,535 (seconds). By default, the value is set to 300
(seconds). If you click Infinite, a function of write-delay
(or delayed writing) becomes disabled.
This parameter enables or disables the state of a global
console-log.
Choose the severity of the information type, which is
logged. The values to choose: 0 (Emergencies),
1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings),
5 (Notifications), 6 (Information) and
7 (Debugging).
Enter an identification name to use it. the number of
characters can be used up to 15. Specify the name of a
discriminator profile. Based on the filtering standard
stipulated on this profile, console-log messages will be
filtered.
This parameter enables or disables the log state of a
global SMTP (Simple Mail Transfer Protocol).
Choose the severity of the information type, which is
logged. The values to choose: 0 (Emergencies), 1
(Alerts), 2 (Critical), 3 (Errors), 4 (Warnings),
5 (Notifications), 6 (Information), and 7
(Debugging).
Overview
Overview
Overview
3 System
25