Acl Interface Access Group - Panasonic GA-ML Series Manual

8.3

ACL Interface Access Group

Use the following window to implement the settings on an ACL access
group of the port specified and display its settings.
Choose ACL > ACL Interface Access Group to display the following
window.
In the section of ACL Interface Access Group, you can configure the
following parameters.
From Port/ To Port
Direction
Action
Type
ACL Name
Click Apply to check the content changed.
Click Please Select to display the access control list configured already
and use it in this window.
Click Please Select to display the following window.
Figure 8-26 ACL Interface Access Group
Parameter
Choose the port you use.
Choose a direction. The options available are In and
Out.
Choose the action you perform. The options available
are Add and Delete.
Choose an ACL type. The options available are IP ACL,
IPv6 ACL, MAC ACL and Expert ACL.
Enter the name of ACL. The number of characters for
the name can be up to 32. Then click ACL Name to
choose an existing ACL from a list.
8 ACL (Access Control List)
8.3 ACL Interface Access Group
Overview
272