Snmp Host Table Settings - Panasonic GA-ML Series Manual

4.4.4

SNMP Host Table Settings

Use the following window to implement the settings on an SNMP host
and display its settings.
Choose Management > SNMP > SNMP Host Table Settings to display
the following window.
In the section of SNMP Host Settings, you can configure the following
parameters.
Parameter
Host IPv4 Address
Host IPv6 Address
User-based Security
Model
Security Level
Figure 4-7 SNMP Host-table Settings
Enter an IPv4 address of an SNMP notification host.
Enter an IPv6 address of an SNMP notification host.
Choose a security model. The options available are as
follows.
• SNMPv1 - this option allows group-users to use the
SNMPv1 security model.
• SNMPv2c - this option allows the group-users to use
the SNMPv2c security model.
• SNMPv3 - this option allows the group-users to use
the SNMPv3 security model.
After choosing SNMPv3 from the user-based security
model, choose the security level. The options available
are as follows.
• NoAuthNoPriv - an authentication is not
implemented, and encrypting the packets, which are
transmitted between a switch and a remote SNMP
manager, is not operated (or done).
• AuthNoPriv - an authentication is needed, and
encrypting packets, which are transmitted between
a switch and a remote SNMP manager, is not
implemented.
• AuthPriv - an authentication is needed, and
encrypting packets, which are transmitted between
a switch and a remote SNMP manager, is operated.
4 Management
4.4.4 SNMP Host Table Settings
Overview
59