Table of Contents
Advertisement
4
.
9
.
1
.
T
F
T
P
4
.
9
.
1
.
T
F
T
P
On the Switch Tools Configuration Menu, pressing "T" opens the TFTP
Software Upgrade screen as shown in Fig. 4-9-2. On this screen, you can
PN23129K/PN23129A Local Management System
Switch Tools Configuration -> TFTP Software Upgrade
Image Version:
TFTP Server IP:
Image File Name:
Reboot Timer:
(Please set timer value at Reboot Menu)
-------------------------------- <COMMAND> -----------------------------------
Set TFTP [S]erver IP Address
Set Image [F]ile Name
[U]pgrade Image
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
execute and configure firmware upgrades.
Screen Description
Image Version
Displays the current firmware version.
TFTP Server IP
Displays the IP address of the TFTP server with the firmware to be
upgraded installed.
Image File
Displays the file name of the firmware to be upgraded.
Name
Reboot Timer
Displays the time before rebooting after downloading the firmware.
You can set the time in the System Reboot Menu.
Available commands are listed below.
S
Set the IP address of the TFTP server with the firmware to be upgraded installed.
Press "S." The command prompt changes to "Enter IP address of TFTP server>."
Enter the IP address of the TFTP server.
F
Set the file name of the firmware to be upgraded.
Press "F." The command prompt changes to "Enter file name>." Specify the file
name of the downloaded program in 30 characters or less.
U
Start the upgrade.
Press "D." The command prompt changes to "Download file(Y/N)>." Confirm
whether or not you wish to start the process. Confirm that all settings are
correct. Press "Y" to start the upgrade. If you find any incorrect setting, press
"N" to reset the settings.
S
o
f
t
w
a
r
e
U
p
S
o
f
t
w
a
r
e
U
p
2.0.0.xx
0.0.0.0
0 seconds
Fig. 4-9-2 TFTP Software Upgrade
210
g
r
a
d
e
g
r
a
d
e
Advertisement
Table of Contents
