Table of Contents
Advertisement
3.1.20. Time Configration
Select "Basic Config" and "Time Config" to open the screen shown in Figure 3-20.
On this screen, you can configure the time settings and the SNTP settings.
Screen Description
Time Zone
Daylight Saving
SNTP Server
SNTP Update
Note:
In case the SNTP server is located outside of the firewall, connection with the
SNTP server may not be possible depending on settings by the network
administrator. For details, ask your network administrator.
If you wish to disable the time synchronization function, set the SNTP server IP
to "0.0.0.0."
Figure 3-20 Time Configuration of This Switch
Displays the time zone.
Displays the application status of Daylight Saving (Summer time) .
In case the set time zone is a zone where Daylight Saving is not applied, "N/A"
is displayed, and this configuration is not available.
When this switch is used domestically, this configuration is not required.
Displays the IP address of the SNTP server that executes time synchronization.
Displays the interval of time synchronization with the SNTP server.
43
Advertisement
Table of Contents
