Product Description; General Information; Main Features - Panasonic MS104 FA Reference Manual

KNX Multi Functional Switch

4 Product description

4.1 General information

KNX Multi-Functional Switch is a room controller with 12 capacitive touch buttons over 4 Gang and
integrated real time clock, temperature sensor, humidity sensor, proximity sensor and brightness sensor. It
also has one digital input and one temperature sensor (NTC) input.
KNX Multi-Functional Switch is powered via KNX bus line without an external power supply. The device can
be programmed to enable, disable or configure its features and functions via ETS.
Thanks to thermostat function which is one of the most important feature of the product; heating and cool-
ing control can be done included 2/4 pipe fancoil systems. With the help of touch buttons, a lot of control
operations can be done especially blinds/shutter, switching and dimming. Additionally; the device also can
send temperature and humidity measured values to other KNX devices on the bus line.
KNX Multi-Functional Switch can be installed in flushed-mounted or hollow-wall boxes.

4.2 Main features

 Configurable touch buttons up to 4 Gang for single or rocker operation
 Sound feedback for touch buttons functions
 Configurable feedback LEDs can be used with buttons or KNX group objects
 Customized icon label stickers for touch buttons
 Activating standby mode according to presence information determined via proximity sensor
 Adjusting backlight of display and touch buttons according to ambient light information determined
via brightness sensor
 Operating energy saving functions of thermostat according to information of the digital input
 Controlling thermostat functions according to information of external temperature sensor input or
monitoring the sensor values via KNX
 Temperature and humidity sensors can be calibrated before ETS programming by parameters or after
ETS programming by communication objects
 Weekly Thermostat Program can be configured over the device (only LCD model) or DCA (Device
configuration app) inside ETS
 Scene actuator functions
Version: 1.0 Jan-20 Page 5/20