Access Control List (Acl) Commands - Panasonic ZEQUO 6400 Operating Instructions Manual

7. Access Control List (ACL) Commands

7. Access Control List (ACL) Commands
For network security protection, blocking unauthorized access from
internal and external sources is important.
Access Control is a function to filter packet transfer by setting rules
after checking the header information of packets that reach the
Switching Hub. To use the Access Control function, you need to create
an Access Control List (ACL), which defines filtering targets, conditions,
and actions, and configure target ports and VLANs.
 Access List Profile
This Switching Hub allows you to create an ACL named as "access list profile" with IDs
1 to 6.
In a profile, you can configure filtering targets from the following various categories.
 IEEE 802.1p priority

VLAN name, VLAN number

MAC address
 Ether type

IP address
 DSCP (Differentiated Services Code Point)
Figure 7-1 Access Control overview
88