Cist (Mst Instance 0) Configuration - Panasonic Switch-M12PWR Operation Manual

4.7.4.a. CIST (MST Instance 0) Configuration
On the Multiple Spanning Tree Configuration, pressing "C" opens the CIST
Configuration screen, as shown in Fig. 4-7-16. On this screen, you can do
CIST configuration.
PN23129K/PN23129A Local Management System
Multiple Spanning Tree Configuration -> CIST Configuration
CIST Root Port:
CIST Root Path Cost:
CIST Root:
CIST Regional Root Cost: 0
CIST Regional Root: 0000 000000000000 CIST Bridge Hello Time:
CIST Hello Time:
CIST Maximum Age:
CIST Forward Delay: 15
-------------------------------- <COMMAND> -----------------------------------
Set CIST Bridge [P]riority
Set CIST Bridge [H]ello Time
Set CIST Bridge [M]aximum Age
Command>
Enter the character in square brackets to select option
0 Time Since Topology Change: 0
0 Topology Change Count:
0000 000000000000
CIST Bridge ID:
CIST Bridge Maximum Age:
2 Sec. CIST Bridge Forward Delay: 15
20 Sec. Max Hop Count:
Sec.
Set CIST Bridge [F]orward Delay
Set MSTP Max H[o]p Count
[Q]uit to previous menu
Fig. 4-7-16 CIST Configuration
106
Sec.
0
0000 000000000000
2 Sec.
20 Sec.
Sec.
20