A3/11"x17" Tray Unit Type M2 (D749)
• Make sure that bosses [A] (two each on the left/right rails) pass through the holes in the tray.
If you close the tray without doing this, it will be impossible to open the tray.
17. Return the factory SP sheet and SD card holder that you removed in Step 9.
18. Re-install the front cover [A] ( x2).
19. Turn on the machine.
20. Use SP5959-2 to select the paper size for Tray 1 (A3 or DLT).
21. After selecting the paper size, switch the machine off and on and check that the selected paper size
is displayed on the operation panel.
391