Restoration Procedure - Ricoh MP C6502SP Field Service Manual

2. Installation
• You can switch the searchable PDF function on and off in the [OCR Settings] screen after installing
the OCR unit.
• If you want to use the searchable PDF function, select [On] for [OCR Settings]. (Default: [Off])

Restoration Procedure

When you install the OCR Unit Type M2, the searchable PDF function is saved on the HDD and the SD
card ID is saved in NVRAM.
Therefore, you need to re-install the OCR Unit Type M2 after replacing the HDD or NVRAM.
When the original SD card exists
• When you replace the HDD
Re-install the OCR Unit Type M2 from the original SD card.
• When you replace the NVRAM
If you upload / download the NVRAM data, re-install the OCR Unit Type M2 from the
original SD card.
If you don't upload / download the NVRAM data, order a new SD card (service part) of the
OCR Unit Type M2. Then re-install the OCR Unit Type M2 from the new SD card.
• When you replace the HDD and NVRAM at the same time
Re-install the OCR Unit Type M2 from the original SD card.
When the original SD card is lost
Order a new SD card (service part) of the OCR Unit Type M2, and then re-install from the new SD
card.
• When you re-install the OCR Unit Type M2, do the same procedure as the original installation
procedure. (
420
page 418 "Installation Procedure")