Installation
• The unit must be connected to a power source that is close to the unit and easily accessible.
• Make sure that the main machine is switched off and that its power cord is disconnected before
doing the following procedures.
1. Remove the stay [A] ( x2).
2. Remove the retainers [B] [C] and the shipping material [D] ( x1).
3. Check the position of the front and back side fences and make sure that they are set for DLT or A3.
4. If you need to adjust the positions of the side fences for the paper to be loaded in the tray, remove
the front panel [A] ( x10).
A3/11"x17" Tray Unit Type M2 (D749)
385