10. Turn the paper transfer roller shaft [A] clockwise by using the link [B] to separate the paper transfer
roller unit from the ITB. You can pull the drawer unit out.
• When mounting the motor block, screw the motor in first. Then, assemble links [A], [B] and [C]
as shown below. There is also a diagram embossed on the motor cover to help you to install
the links correctly.
• Lock shaft (Cut surface to the upper left) [A]
• Link (Long hole to the right) [B]
• Paper transfer roller shaft (Cut surface to the lower side) [C]
Drawer Unit
599