Image Adjustments: Side-To-Side Registration - Ricoh MP C6502SP Field Service Manual

2. Installation
36. Reattach the right cover. ( x 2)
37. Remove the cover of the main machine.
38. Connect the heater bracket to the main machine.
39. Reattach the cover of the main machine.
40. Connect the LCT power connector to the main machine, and then turn on the main power.
41. To move down the paper tray, cover the photosensor with your left hand and press the bottom
plate operation button [A].
42. Reattach the side fence.
43. Close the top right cover.

Image Adjustments: Side-to-side registration

1. Use the Trimming Area Pattern (SP2-109-003, No. 14) to print the test pattern.
2. Go to SP1-003-007 (Side-to-Side Reg: LCT).
3. Load paper (A4 LEF) in the LCT tray, and then copy a couple of sheets.
4. Enter the value in SP1-003-007 to adjust the blank margin [A] to 2 mm.
The default value is 0mm. Press [+] to broaden the margin, and press [-] to narrow it. You can
adjust the value in 0.1mm intervals.
352