Toshiba e-STUDIO556 Service Manual page 104

3.9.2 Construction
Scanner
Original glass Original glass
RADF original glass
Carriage-1 Exposure lamp (EXP)
Inverter board (INV)
Reflector
Mirror-1
Carriage-2 Mirror-2
Mirror-3
Lens unit
CCD driving PC
board (CCD)
Automatic original
detection sensor
(S1-5)
Automatic original
detection sensor
(S1, S2)
Driving section Scan motor (M1)
Other Scanning section control PC board (SLG)
Carriage home position sensor (S6)
Platen sensor (S53)
Platen sensor (S54)
Rubber damper
SLG board cooling fan (M23)
Exposure lamp cooling fan-1 (M36)
Scanner unit cooling fan-1 (M38)
Exposure lamp cooling fan-2 (M37)
e-STUDIO556/656/756/856/557/657/757/857
OUTLINE OF THE MACHINE
Xenon lamp (35W)
(for e-STUDIO556/656/756/856)
(for e-STUDIO557/657/757/857)
• 2-phase stepping motor
• Wire drive
• Driving the carriage-1 and carriage-2
(for e-STUDIO556/656/756/856)
(for e-STUDIO557/657/757/857)
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
3 - 58