Installing The Cable Management Arm - Avaya S8800 Installing

For avaya one-x speech

Hide thumbs Also See for S8800:

Table of Contents

Next steps

Install the cable management arm if desired.

Installing the cable management arm

Prerequisites

Attach rails to the rack and install the server in the rack.

The cable-management arm can be installed on either side of the server. This procedure shows

it being installed on the left side. To install the cable-management arm on the right side, follow

the instructions and install the hardware on the opposite side.

1. Connect one end of the support arm (1) to the same slide rail to which you plan to

2. Install the L-shaped cable-management stop bracket (3) on the unattached end of

Installing the Avaya S8800 Server for Avaya one-X Speech

attach the cable-management arm so that you can swing the other end of the

support arm (2) toward the rack. See the following figure.

the support arm. See the following figure

Installing the Avaya S8800 Server

November 2009

Table of Contents