Table of Contents
Advertisement
3. Information area
4. Work space
Subscription management
This section describes how to subscribe handsets. Before you can use a handset, you must
register the handset and subscribe it to the system.
Subscribing a handset
Prerequisites
• A Directory Number (DN) must be available and free. For information about making DNs
available on the system, see
• You also must configure the Communication Server 1000 (CS 1000) system to which the
SIP DECT system is connected.
For information, see
Subscribing a handset
1. Open Internet Explorer and enter the following URL in the address field:
2. Select Subscriptions from the menu on the left in the DAP manager IP DECT
3. Select the required available extension number from the list on the Subscription
4. Click Enable.
SIP DECT Fundamentals
The Task list shows the available tasks for a feature. For example, the feature
Subscriptions has the tasks Enable, Disable, Terminate, and Delete Number.
Notes or additional information appear in this area.
You can enter or view data in the Work area.
Call Server Configuration
localhost/cds.
TheDAP manager IP DECT page appears.
page.
The Subscriptions page appears.
page, for example, select 5001.
You can subscribe the handset to the extension number only if the status of the
handset is free.
If the number you require does not appear, select another page. The page number
appears in the top and bottom rows of the subscriptions table.
The status of the subscription record changes from Free to Enabled and the
Personal Identification Number (PIN) appears. The DAP manager generates a PIN
Add a DN range
on page 132.
on page 114.
Subscription management
October 2012
123
Advertisement
Table of Contents
