Verify IPSI translations
1
Type list ipserver-interface and press
2
Verify that the ISPI circuit pack(s) is translated.
Verify IPSI connectivity
1
Under Diagnostics click Ping.
2
Select "IPSIs with cab number (1–99) ___ carrier number ___ ." Fill in the blanks with the correct
cabinet and carrier numbers.
3
Click Execute Ping.
4
Verify that the endpoints respond correctly.
Install additional circuit packs
If the customer is adding circuit packs, install them now. For information on installing and administering
various circuit packs, see
Adding New Hardware--S8700
November 2003
Enter
Adding circuit packs
on page 14.
.
Adding a port network
69