Chapter 3 | Setting up the Device
These sections describe how to set up the device:
Navigation
•
Mounting the Device on to the Rack
•
Connecting Cables to the Device
•
Configuring the IP Address for the Avaya Scopia
•
Verifying the Server Installation
Mounting the Device on to the Rack
To mount the device, perform these tasks in the order listed:
Navigation
•
Preparing the Rack and Rails for Mounting the Device
•
Mounting the Outer Rails on to the Rack
•
Mounting the Device on to the Outer Rails
Preparing the Rack and Rails for Mounting the Device
About this task
This section describes how to prepare all the equipment required to mount the device onto the rack,
including choosing the rack and finding the right place on the rack to mount the device.
Before you begin
Ensure that the room is suitable for the device and remove the device from its box, as described in
Preparing the Avaya Scopia
Procedure
1. Verify that you have a 19" rack that meets the EIA-310 standards. This standard includes the
Installation Guide for Avaya Scopia
on page 9
on page 19
on page 20
®
Application server Setup
exact specifications, including the shape of the holes, their size, the depth of the rack and
other features.
The rack should be sturdy enough to support the device when you slide it in and out.
®
Application Server Version 2
®
Application server
on page 20
on page 9
on page 11
on page 15
on page 6.
Setting up the Device | 9