Avaya 6120/6140 WLAN Handset Configuration
Telephony Protocol
Use Telephony Protocol to select the VoIP protocol that your site is licensed to download and
run. The UNIStim Protocol to use for the Avaya 6120/6140 WLAN Handset is 032. Other
protocols cause the handset to malfunction.
Push-to-talk
All 24 Push-to-talk channels are allowed by default. The Push-to-talk menu provides the
following options:
• Allowed Channels
Toggle the allowed status of any allowed channel by scrolling to the channel to be
disallowed and pressing Enter. Allowed channels are displayed with an asterisk (*) in the
left column. Only those channels allowed in the Administration menu appear on the
Configuration menu, where they can be subscribed to by the user.
• Named Channels
You can name allowed channels. The name appears instead of the channel number when
channel information appears on the handset. The name appears on the local handset
only; it does not appear on target handsets.
• Priority Channel
You can configure the priority channel, also referred to as channel 25, which makes it
available to all Push-to-talk handsets. When you make a Push-to-talk broadcast on the
priority channel, it overrides any active Push-to-talk transmission on all other channels.
You can name the priority channel.
Time zone
Worldwide time zone options are available. Select your time zone from the list. Greenwich
Mean Time (GMW) is the default.
Daylight Savings
You can adjust the handset for daylight savings time. The following are the Daylight Savings
menu options:
• DST No Adjust (Default)
• DST Auto (USA)
112
Avaya WLAN IP Telephony Installation and Commissioning
November 2010