Dlp- D8 Open The Front Cabinet Compartment (Door) - Cisco ONS 15454 SDH Procedure Manual

Hide thumbs Also See for ONS 15454 SDH:
Table of Contents

Advertisement

Chapter 17
DLPs D1 to D99
Figure 17-3
Repeat this task for every ONS 15454 SDH you need to install.
Step 3
Return to your originating procedure (NTP).
Step 4
DLP-D8 Open the Front Cabinet Compartment (Door)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
The ONS 15454 SDH has an ESD plug input and is shipped with an ESD wrist strap. The ESD plug input
Note
is located on the outside of the shelf assembly on the right side. It is labeled "ESD" on the top and
bottom. Always wear an ESD wrist strap and connect the strap to the ESD plug when working on the
ONS 15454 SDH.
Open the front door lock.
Step 1
The ONS 15454 SDH comes with a pinned hex key for locking and unlocking the front door. Turn the
key counterclockwise to unlock the door and clockwise to lock it.
78-17194-01
Mounting the Air Ramp in a Rack
Equipment rack
This task opens the front door.
Pinned hex (Allen) key
NTP-D2 Install the Shelf Assembly, page 1-5
Required
Onsite
None

DLP- D8 Open the Front Cabinet Compartment (Door)

Cisco ONS 15454 SDH Procedure Guide, R7.0
17-9

Advertisement

Table of Contents
loading

Table of Contents