Ntp- D91 Upgrade E1-N-14 And Ds3 I-N-12 Protect Cards From 1:1 Protection To 1:N Protection - Cisco ONS 15454 SDH Procedure Manual

NTP- D91 Upgrade E1-N-14 and DS3 i-N-12 Protect Cards from 1:1 Protection to 1:N Protection

•
•
•
As needed, complete the
Step 4
Stop. You have completed this procedure.
NTP-D91 Upgrade E1-N-14 and DS3 i-N-12 Protect Cards from
1:1 Protection to 1:N Protection
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
E1-N-14 and DS3i-N-12 cards from 1:1 to 1:N protection. If you are already logged in, proceed to Step 2.
As needed, complete the
Step 2
Step 3 Perform any of the following tasks as needed:
•
•
As needed, complete the
Step 4
Stop. You have completed this procedure.
Cisco ONS 15454 SDH Procedure Guide, R7.0
10-4
DLP-D208 Change External Alarms Using the AIC-I Card, page 19-5
DLP-D209 Change External Controls Using the AIC-I Card, page 19-6
DLP-D210 Change AIC-I Card Orderwire Settings, page 19-7
"NTP-D108 Back Up the Database" procedure on page
This task converts E1-N-14 and DS3i-N-12 protect cards from 1:1 to 1:N
protection.
None
DLP-D71 Create a 1:1 Protection Group, page 17-62
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page 17-49
"NTP-D108 Back Up the Database" procedure on page
DLP-D176 Convert E1-N-14 Cards From 1:1 to 1:N Protection, page 18-63
DLP-D177 Convert DS3i-N-12 Cards From 1:1 to 1:N Protection, page 18-65
"NTP-D108 Back Up the Database" procedure on page
Chapter 10 Change Card Settings
15-5.
at the node where you want to convert the
15-5.
15-5.
78-17194-01