Figure 21-10 Line Drop-Down List For An Stm-16 Card - Cisco ONS 15454 SDH Procedure Manual

Chapter 21 DLPs D400 to D499
Figure 21-10
Card View
Performance
Intervals
radio buttons
Directions
radio buttons
Click Refresh. All PM counts recorded by the near-end or far-end node for the specified outgoing signal
Step 4
type on the selected card and port appear. For PM parameter definitions, refer to the "Performance
Monitoring" chapter in the Cisco ONS 15454 SDH Reference Manual.
View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Step 5
Curr (current) and Prev-n (previous) columns. For PM parameter definitions, refer to the "Performance
Monitoring" chapter in the Cisco ONS 15454 SDH Reference Manual.
Return to your originating procedure (NTP).
Step 6
78-17194-01
Line Drop-down List for an STM-16 Card
tab
DLP- D458 Monitor PM Counts for a Selected Signal
Port/Line Refresh Auto-refresh
button
Cisco ONS 15454 SDH Procedure Guide, R7.0
Baseline Clear
button button
21-35