Figure 17-11 Login Node Group; Ntp- D23 Log Into The Ons 15454 Sdh Gui - Cisco ONS 15454 SDH Procedure Manual

Chapter 3 Connect the PC and Log into the GUI
NTP-D23 Log into the ONS 15454 SDH GUI
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Note
CTC, during network topology discovery, polls each node in the network to determine which one
contains the most recent version of the CTC software. If CTC discovers a node in the network that has
a more recent version of the CTC software than the version you are currently running, CTC generates a
message stating that a later version of the CTC has been found in the network, and offers to install the
CTC software upgrade. If you have network discovery disabled, CTC will not seek more recent versions
of the software. Unreachable nodes are not included in the upgrade discovery.
Note
As needed, complete the
Step 2
allow you to manage nodes that are not connected to the login node through a data communications
channel (DCC).
Step 3 As needed, complete the
page
Step 4 As needed, complete the
page
As needed, complete the
Step 5
on page
Stop. You have completed this procedure.
78-17194-01
This procedure logs into CTC, the graphical user interface software used to
manage the ONS 15454 SDH. This procedure includes optional node login
tasks.
None
NTP-D278 Set Up Computer for CTC, page 3-2
One of the following procedures:
•
•
•
As needed
Onsite or remote
Retrieve or higher
"DLP-D60 Log into CTC" task on page
For information about navigating in CTC, see
Upgrading the CTC software will overwrite your existing software. You must restart CTC after
the upgrade is complete.
"DLP-D61 Create Login Node Groups" task on page
"DLP-D62 Add a Node to the Current Session or Login Group" task on
17-53.
"DLP-D35 Delete a Node from the Current Session or Login Group" task on
17-27.
"DLP-D25 Configure the CTC Alerts Dialog Box for Automatic Popup" task
17-20.
NTP-D260 Set Up CTC Computer for Local Craft Connection to the
ONS 15454 SDH, page 3-3
NTP-D261 Set Up a Computer for a Corporate LAN Connection to the
ONS 15454 SDH, page 3-5
NTP-D262 Set Up a Remote Access Connection to the
ONS 15454 SDH, page 3-6
17-49.
Appendix A, "CTC Information and Shortcuts."
Cisco ONS 15454 SDH Procedure Guide, R7.0

NTP- D23 Log into the ONS 15454 SDH GUI

17-51. Login node groups
3-7