Cisco ONS 15454 SDH Procedure Manual page 768

DLP- D421 View STM-N PM Parameters
If you delete the Java policy file, you cannot log into nodes running Software R4.0 and earlier. If you
Caution
delete the file and want to log into an ONS 15454 SDH running an earlier release, insert the software
CD for the release into your PC CD-ROM and run the CTC setup wizard to reinstall the Java policy file.
Return to your originating procedure (NTP).
Step 3
DLP-D421 View STM-N PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the STM-N card where you want to view PM counts. The card view appears.
Step 1
Click the Performance tab
Step 2
Cisco ONS 15454 SDH Procedure Guide, R7.0
21-2
This task enables you to view performance monitoring (PM) counts on
an STM-N card and port to detect possible performance problems.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
(Figure 21-1).
Chapter 21 DLPs D400 to D499
78-17194-01