Cisco ONS 15454 SDH Procedure Manual page 31

Change Card Settings
NTP-D88 Modify Line Settings and PM Parameter Thresholds for Electrical Cards
NTP-D89 Modify Line Settings and PM Parameter Thresholds for Optical Cards
NTP-D118 Modify Alarm Interface Controller–International Settings
NTP-D91 Upgrade E1-N-14 and DS3 i-N-12 Protect Cards from 1:1 Protection to 1:N Protection
NTP-D311 Modify Port Settings and PM Parameter Thresholds for SAN Cards
NTP-D330 Change Card or PPM Service State
NTP-D331 Manage Pluggable Port Modules
Change Node Settings
NTP-D81 Change Node Management Information
NTP-D201 Change CTC Network Access
NTP-D327 Modify OSI Provisioning
NTP-D202 Customize the CTC Network View
NTP-D203 Modify or Delete Card Protection Settings
NTP-D277 Modify or Delete Communications Channel Terminations and Provisionable Patchcords
NTP-D85 Change Node Timing
NTP-D205 Modify Users and Change Security
NTP-D87 Change SNMP Settings
Upgrade Cards and Spans
NTP-D234 Upgrade the XC-VXL-2.5G Card to the XC-VXL-10G or XC-VXC-10G Card
NTP-D333 Upgrade the XC-VXL-10G Card to the XC-VXC-10G Card
NTP-D314 Upgrade the TCC2 Card to the TCC2P Card
NTP-D94 Upgrade STM-N Cards and Spans Automatically
NTP-D95 Upgrade Optical Spans Manually
NTP-D374 Upgrade STM-N Cards Manually
Convert Network Configurations
NTP-D338 Convert a Point-to-Point to a Linear ADM Automatically
NTP-D154 Convert a Point-to-Point to a Linear ADM Manually
NTP-D318 Convert an Unprotected Point-to-Point or Linear ADM to a Two-Fiber MS-SPRing
NTP-D155 Convert a Point-to-Point or a Linear ADM to a Two-Fiber MS-SPRing Manually
NTP-D351 Convert a Point-to-Point or Linear ADM to an SNCP Automatically
NTP-D156 Convert a Point-to-Point or Linear ADM to an SNCP Manually
NTP-D320 Convert an SNCP to a Two-Fiber MS-SPRing Automatically
NTP-D210 Convert an SNCP to a Two-Fiber MS-SPRing Manually
78-17194-01
10-1
10-5
10-6
11-1
11-2
11-3
11-4
11-6
11-7
11-7
12-1
12-10
12-12
13-1
Automatically
13-6
10-3
11-2
11-5
12-4
12-5
12-7
13-2
13-4
13-10
13-11
13-12
13-14
Cisco ONS 15454 SDH Procedure Guide, R7.0
Procedures
10-2
10-2
10-4
10-5
11-5
12-2
13-8
vii