Installing And Removing The Front Door; Installing The Front Door - Cisco NCS 4201 Hardware Installation Manual

Installing and Removing the Front Door

Figure 12: Guiding the Cables from the Front Panel through the Cable Brackets

Installing and Removing the Front Door

The front door provides additional space in front of the Cisco NCS 4201 to accommodate cables. You can
remove the door to provide unrestricted access to the front of the chassis.

Installing the Front Door

Step 1
Align the door with the cable bracket as shown in the figure below.
Step 2 Tighten the screws on both sides on the top and bottom.
Cisco NCS 4201 Hardware Installation Guide
38
Installing the Cisco NCS 4201