Table 20-18 Line Options For The Ds3I-N-12 Cards - Cisco ONS 15454 SDH Procedure Manual

DLP- D341 Change Line and Threshold Settings for the DS3i-N-12 Cards
Table 20-18
Parameter
SF BER
SD BER
Line Type
Detected
Line Type
Line
Coding
Line
Length
Admin
State
Cisco ONS 15454 SDH Procedure Guide, R7.0
20-48
Line Options for the DS3i-N-12 Cards (continued)
Description
Sets the signal fail bit error rate.
Sets the signal degrade bit error rate.
Defines the line framing type.
(Display only) Displays the detected line
type.
(Display only) Defines the DS3E
transmission coding type.
Defines the distance (in feet) from
backplane connection to the next
termination point.
Sets the port service state unless network
conditions prevent the change. For more
information about administrative states,
refer to the "Administrative and Service
States" appendix of the
Cisco ONS 15454 SDH Reference
Manual.
Chapter 20
Options
1E-3
•
1E-4
•
1E-5
•
1E-5
•
1E-6
•
• 1E-7
• 1E-8
• 1E-9
Unframed
•
M13
•
C Bit
•
Auto Provisioned
•
Unframed
•
M13
•
• C Bit
• Auto Provisioned
B3ZS
0 - 225 (Default)
•
226 - 450
•
Unlocked—Puts the port in service. The
•
port service state changes to
Unlocked-enabled.
• Unlocked,automaticInService—Puts the
port in automatic in-service. The port
service state changes to
Unlocked-disabled,automaticInService.
Locked,disabled—Removes the port
•
from service and disables it. The port
service state changes to
Locked-enabled,disabled.
• Locked,maintenance—Removes the port
from service for maintenance. The port
service state changes to
Locked-enabled,maintenance.
DLPs D300 to D399
78-17194-01