Dlp- D102 Hard-Reset A Ce-100T-8 Card Using Ctc - Cisco ONS 15454 SDH Procedure Manual

DLP- D102 Hard-Reset a CE-100T-8 Card Using CTC

Click Delete.
Step 3
Return to your originating procedure (NTP).
Step 4
DLP-D102 Hard-Reset a CE-100T-8 Card Using CTC
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Hard-resetting a CE100T-8 card causes a traffic hit.
Caution
The hard-reset option is enabled only when the card is placed in the Locked-disabled,maintenance
Note
service state.
In node view, click the Inventory tab. Locate the appropriate card in the inventory pane.
Step 1
Click the Admin State drop-down list and select Locked,maintenance. Click Apply.
Step 2
Click Yes in the "Action may be service affecting. Are you sure?" dialog box.
Step 3
The service state of the card becomes Locked enabled, loopback & maintenance. The card's faceplate
Step 4
appears blue in Cisco Transport Controller (CTC) and the SRV LED turns amber.
Right-click the card to reveal a shortcut menu.
Step 5
Click Hard-reset Card.
Step 6
Step 7 Click Yes in the "Are you sure you want to hard-reset this card?" dialog box.
Step 8 Return to your originating procedure (NTP).
Cisco ONS 15454 SDH Procedure Guide, R7.0
18-2
This task hard-resets the CE100T-8 Ethernet card.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
Chapter 18 DLPs D100 to D199
78-17194-01